Exposure-type method ( cement mortar finish coat surfaces )

1. Remove all objects, dust, and loose material from the construction surface.
2.  Coating of cracks, parapet angles, and new/old seams may be reinforced by applying 2-3 coats of waterproofing and heat-insulating finish paint.
3. Apply one coat of oil-based ultra-strong primer curing agent and wait for 30 minutes before applying the next coat.
4. Apply 3-4 coats of waterproofing and heat-insulating finish paint to the whole surface at 30-minute intervals.

Waterproofing materials should be applied in thin layers. Single thick coats are prone to cracking. Special attention must be paid to weather conditions to prevent formation of bubbles/bulges under uncured paint films caused by rain.