Waterproofing materials
Water-based Thick-coat Colored PU P-286C
This single-component waterproof coating which is mainly composed of macromolecular materials is characterized by high elasticity, emulsification, and cold application. After curing and membrane formation, a rubber-like elastomer is generated. Its characteristics include outstanding tensility, ductility, and impermeability. In addition, it is brightly colored, odorless, non-corrosive, and non-flammable without unpleasant smells.
【Properties】
- High ratio of solid components, simple and convenient application
- Ideal alternative to expensive oil-based dual-fluid PU
【Uses】
- Exclusive use as a waterproofing agent for roofs and atrium gardens possible
- Elastic waterproofing and crack-resistant material for roofs, bathrooms, and external basement walls
【Methods】
- Remove all objects, dust, and loose material from the construction surface.
- For full application, follow the following steps:
a. Apply a thin coat of Plimates CurePrime P-309C (allow a drying period of around 30 minutes).
b. Partially apply 2-3 coats to seams and cracks (allow a membrane drying period of 30 minutes before applying the next coat).
c. After completion of partial reinforcement, apply a full 2mm-thick coat of P-286C.
【Reminders】
- Due to the slight after-tack after membrane drying, it is recommended to add a coat of finish paint for insulation.
- The thickness of single thick coats should not exceed 2mm.
- Attention must be paid to weather conditions to prevent diminished adhesion of the dried membrane caused by exposure to rain.
【Packaging】
20kg.
【Color】
Green, White, Grey, other colors available on request.
【Consumption】
Around 5-6m² / Dried membrane thickness of around 2mm.
【Application equipment】
Brush, Roller, or Trowel.
