Waterproofing materials
Water-based Rubberized Asphalt Waterproofing Adhesive P-156C
This product is an asphalt latex derived from high-density rubber. It is derived through copolymerization of macromolecular resin and exhibits excellent ductility, adhesion, and water resistance. It possesses strong soak resistance capabilities which are characteristic of asphalt. It also has other advantages such as resistance to aging at high temperatures and resistance to brittleness at low temperatures that generic asphalt products lack.
【Properties】
- Long-term soak resistance without bubble formation
- Air permeable, applicable to wet surfaces
- Exceptional adhesion to cement, thick bed mortar for tile attachment may be applied directly upon application
【Uses】
Waterproofing projects for roofs, bathrooms, balconies, external basement walls, and atriums.
【Methods】
- Remove all objects, dust, and loose material from existing RC or cement mortar surfaces or rinse them with clear water. Maintain a moist condition without puddles.
- Dilute the primer with water at a ratio of 1:3. Use a broom (bristle brush) or paint sprayer to coat the whole surface. Ensure that the adhesive fully permeates and saturates the surface. After a drying period of around 30 minutes, follow-up waterproofing materials may be applied.
【Reminders】
- In case of excessive sand or powder formation on construction surfaces, curing through 1-2 coats of Plimates CurePrime P-309C prior to application of P-156C is recommended (construction surfaces must be completely dry when the agent is applied).
- Due to the color bleeding properties of the utilized raw materials, the product should not be applied to slanted roofs and light-colored silicone on window frames.
【Packaging】
19kg.
【Color】
Dark brown
【Consumption】
Around 11-12㎡ / Dried membrane thickness of around 1mm.
【Application equipment】
Brush, Roller, Broom (bristle brush), or Spray equipment.
