Water-based Elastic Anti-leak and Waterproofing Paint with Added Fiber P-576C-Waterproofing materials-Product Profile-Water-based Elastic Anti-leak and Waterproofing Paint with Added Fiber P-576C

Waterproofing materials

Water-based Elastic Anti-leak and Waterproofing Paint with Added Fiber P-576C

This product consists of refined water, alkali and weather resistant resin, and special crack-resistant fiber and pigments. After curing and membrane formation, a thick and glossy elastomer is generated. This product is characterized by exceptional tensility and impermeability coupled with exceptional crack resistance. It is non-toxic, odorless, and non-corrosive.

【Properties】

Powerful soak resistance properties.
Corrects the shortcomings of generic elastic cement paint products which lack crack resistance.
Without shortcomings of other waterproofing paint products with added fiber including uneven fiber distribution and coating difficulties.

【Uses】

Crack-resistant, waterproofing, and anti-leak water-based and elastic coating material for roofs, bathrooms, and atriums.

【Methods】

Remove all objects, dust, and loose material.
Reinforce the coating on cracks, parapet angles, and new/old seams.
Depressions on flat surfaces may be filled and leveled with Rapid-hardening Water-plugging Powder P-801 with added sand. Don’t apply the next layer until the previous layer is completely dry.
Apply Plimates CurePrime P-309C as primer. Allow a drying time of 30 minutes, then apply at least 2-3 coats of P-576C diluted with 0%-10% water at a minimum of 4-hour intervals (the thickness of each layer should not exceed 1mm).

【Reminders】

Apply multiple thin layers since single thick coats are prone to cracking.
The surface must be completely covered to prevent peeling off or bubble/bulge formation caused by seepage on the sides.
If verification and testing of waterproofing layers is required, a curing period of 7 days must be allowed to prevent bubble/bulge formation under uncured membranes. Fiber of other brands is coarse and tangled, which tends to lead to bubble/bulge formation.

【Packaging】

20kg.

【Color】

White, Green, Grey, Beige, others upon request.

【Consumption】

Around 11-12m² / Dried membrane thickness of around 1mm.

【Application equipment】

Brush, or Roller (spray coating is not recommended).