【Methods】

• Remove all objects, dust, and loose material from the surface.
• Reinforce waterproofing protection at leak-prone areas (cracks, external corners, cold joints, and drains) by wet-on-wet application: Apply 2-3 coats of Plimates elastomeric waterproofing layer (e.g., water-based PU, flexible cementitious waterproofing coating). Embed anti-cracking mesh when the first coating is still wet.
• Full coating application：

• Firstly, apply Plimates waterproof primer based on the surface on which the system is to be applied. Wait for the primer to dry. 
• Then, apply 2-3 coats of Plimates elastomeric waterproofing layer (e.g., water-based PU, flexible cementitious waterproofing coating). Each coat should be completely dry before proceeding with the subsequent layer.
• Allow drying time for at least a day, then apply P-176C diluted with 0-10% water for at least 2 layers (Note: approximately 30 minutes between each coat).

【Reminders】

• Apply multiple thin coats for better results; excessive film thickness in one layer is prone to cracking. 
• Ensure complete coverage to protect the area from any potential leakage which may cause blisters, bubbles, peeling and flaking.
• Flood test shall be done until the coating is fully cured (requires about 7 days) to avoid premature issues such as blisters and bubbles.