Heat-insulating materials
Plimates CoolTop P-017C
Single-component, water-based, heat insulation waterproofing acrylic finish paint
【Description】
P-017C is a kind of acrylic resin with multiple effects. It is characterized with waterproofing, heat-insulating, UV and weather resistance. Hollow ceramic microspheres are added exclusively for white color, provides optimal thermal insulation performance by reducing thermal conductivity and preventing heat transfer on surfaces such as cementitious surfaces, corrugated sheets and metal sheets.
【Properties】
- Higher gloss and has better crack resistance than flexible cementitious waterproofing coating.
- Early water resistance with strong toughness and has exceptional elongation.
- Excellent coverage, smooth gel texture for easy application.
【Uses】
- Used as water-based elastomeric coating for crack resistance, waterproofing, heat insulating, and decorative protection of external walls of concrete structures and roofs.
- Used as topcoat for general water-based rubberized asphalt, flexible cementitious waterproofing coating etc.
【Methods】
- Remove all objects, dust, and loose material from the surface.
- Reinforce waterproofing protection at leak-prone areas (cracks, external corners, cold joints, and drains) by wet-on-wet application: Apply 2-3 coats of Plimates elastomeric waterproofing layer (e.g., water-based PU, flexible cementitious waterproofing coating). Embed anti-cracking mesh when the first coating is still wet.
- Full coating application：
- Apply Plimates waterproof primer based on the surface on which the system is to be applied. Wait for the primer to dry.
- Then, apply 2-3 coats of Plimates elastomeric waterproofing layer (e.g., water-based PU, flexible cementitious waterproofing coating). Each coat should be completely dry before proceeding with the subsequent layer.
- Allow drying time for at least a day, then apply P-017C diluted with 0-10% water for at least 2 layers (Note: approximately 30 minutes between each coat).
【Reminders】
- Apply multiple thin coats for better results; excessive film thickness in one layer is prone to cracking.
- Ensure complete coverage to protect the area from any latent leakage which may cause blisters, bubbles, peeling and flaking.
- Flood test can only be done when the coating is fully cured (requires about 7 days) to avoid premature issues such as blisters and bubbles.
【Packaging】
20kg.
【Color】
White (optimal for heat insulation), Green, Beige, Gray, others upon request.
【Consumption】
Around 66m² / 2 coats.
(Consumption depends on substrate roughness, surface profile, application method etc.)
【Application tools】
Brush, Roller, or Spray equipment.
【System Structure】
