Waterproofing materials
Plimates FiberTop P-476C
Single-component, water-based, fiber reinforced finish paint
【Description】
P-476C utilizes water, alkali and weather resistant resin, composed of special crack resistance fiber and pigments. A thick and high glossy membrane is formed after curing. It features excellent elongation with waterproofing properties. Additionally, it is characterized with exceptional crack resistance, non-toxic, odorless, and non-corrosive.
【Properties】
- Ultimate immersion properties.
- Perfect solution for issues of lacking crack resistance by existing coating.
- Easy application.
【Uses】
Top coating for roofs, bathrooms, and atriums with crack resistance and waterproofing effect.
【Methods】
- Remove all objects, dust, and loose material from the surface.
- Reinforce waterproofing protection at leak-prone areas (cracks, external corners, cold joints, and drains) by applying 2-3 coats P-476C.
- For full coating, apply Plimates waterproof primer based on the surface on which the system is to be applied. Wait for the primer to dry before applying subsequent coats.
- Then apply P-476C diluted with 0-10% water for at least 2-3 coats (the maximum recommended thickness per layer is 1mm).
【Reminders】
- Apply multiple thin coats for better results; excessive film thickness in one layer is prone to cracking.
- Ensure complete coverage to protect the area from any potential leakage which may cause blisters, bubbles, peeling and flaking.
- Flood test can only be done when the coating is fully cured (requires about 7 days) to avoid premature issues such as blisters and bubbles.
【Packaging】
20kg.
【Color】
White, Green, Gray, Beige, others upon request.
【Consumption】
Around 11-12m² / Dried membrane thickness of 1mm.
(Consumption depends on substrate roughness, surface profile, application method etc.)
【Application tools】
Brush, or Roller. (Not recommended for spray application)
【System Structure】
