Plimates CorroFix P-804
P-804 is applied to rusting metal surfaces. It can turn reddish rusted surface into a black iron oxide barrier layer within a few minutes (colors may vary from partial reddish rust depending on the metal components) and proceed with the subsequent coating application.
【Methods】
- Remove loose rusty flakes, then apply a coat of P-804 thinly. (For heavily rusted surface, it is recommended to apply 1-2 coats of P-804. Proceed to the subsequent system when it is touch dry.)
- P-804 is not easily dried on non-corrosive metal surfaces or coatings. Wipe it off with a dry cloth or consolidate with Plimates CurePrime MAX P-169C / Plimates CurePrime P-309C to facilitate subsequent topcoat.
- P-804 requires a drying time of 4-24 hours (drying time and color after reaction may vary depending on the metal components of the substrate).
- It is advised to proceed with the subsequent coating application within 24 hours when the surface is touch dry.
【Reminders】
- Stir thoroughly before use and do not dilute with water.
- Store in cool dry conditions. Use within 3 months after opening.
- Use non-metallic material container to prevent chemical reactions.
- Tools and equipment used can be cleaned with clean water.
【Packaging】
1kg & 4kg.
【Color】
Transparent.
【Consumption】
Around 0.3kg / m² (Consumption depends on substrate roughness, surface profile, application method etc.)
