Plimates ClearCoat-WB P-161C
P-161C is a water-based, single-component, multipurpose transparent coating with great adhesion to tiles, natural stone etc. It is characterized by high transparency and high gloss with weather, water and dirt resistance properties. Suitable for use on various walls for seepage prevention treatment.
【Properties】
Great bond with slippery surfaces such as tiles, glasses, and metallic surfaces.
【Uses】
- Waterproofing and protection for tiles, pebbled wash walls, natural stone etc.
【Methods】
- Remove efflorescence, moss, and dust from the surface. Repair cracks or uneven surfaces with Plimates ProLevel P-717.
- Apply 2-3 coats of P-161C to the whole surface. Dilute with approximately 20% water to desired consistency for each coat at 30-minute intervals.
- Do not attempt application if rain is imminent. Freshly applied coating must be protected from rain or direct water contact for at least 2 hours.
【Reminders】
- Apply by spray equipment for optimal result (excessive application may result in unattractive white haze).
- Ensure that no other waterproofing materials have been applied to the substrate.
- Cracks and holes can only be filled with silicone or sealant as filler after P-161C is applied to prevent yellowing.
【Packaging】
3.5kg & 18kg.
【Consumption】
18kg: Around 60m² / 2-3 coats.
(Consumption depends on substrate roughness, surface profile, application method etc.)
【Application equipment】
Spray equipment, Brush, or Roller (Thin layer application possible).
