Waterproofing materials
P-647 Water-based Anti-leak and Waterproofing Acrylic Paint with Added Fiber
This product consists of refined water, alkali and weather resistant resin, and special crack-resistant fiber and pigments. After curing and membrane formation, a thick and glossy elastomer is generated. This product is characterized by exceptional tensility and impermeability coupled with exceptional crack resistance. It is non-toxic, odorless, and non-corrosive.
【Properties】
- Powerful soak resistance properties
- Corrects the shortcomings of generic elastic cement paint products which lack crack resistance
- Without shortcomings of other waterproofing paint products with added fiber including uneven fiber distribution and coating difficulties
【Uses】
Crack-resistant, waterproofing, and anti-leak water-based and elastic coating material for roofs, bathrooms, and atriums
【Method】
- Remove all objects, dust, and loose material.
- Reinforce the coating on cracks, parapet angles, and new/old seams.
- Depressions on flat surfaces may be filled and leveled with P-801 Rapid-hardening Water-plugging Powder with added sand. Don’t apply the next layer until the previous layer is completely dry.
- Apply P-930 Ultra-strong Oil-based Curing Agent as a primer. Allow a drying time of 30 minutes, then apply at least 2-3 coats of the water-based waterproofing paint with added fiber diluted with 0%-10% water at a minimum of 4-hour intervals (the thickness of each layer should not exceed 1mm).
【Reminders】
- Apply multiple thin layers since single thick coats are prone to cracking.
- The surface must be completely covered to prevent peeling off or bubble/bulge formation caused by seepage on the sides.
- If verification and testing of waterproofing layers is required, a curing period of 7 days must be allowed to prevent bubble/bulge formation under uncured membranes.
【Packaging】
20kg / 5-gallon plastic drum
4kg / 1-gallon plastic drum
【Color】
White, green, gray, cream-colored, other colors available on request
【Coverage】
Around 11-12m² (3-4 pings) / dried membrane thickness of around 1mm
【Coating tools】
Brush, roller (spray coating is not recommended)