P-215 Water-based Composite Latex Cement-Waterproofing materials-Product Profile-P-215 Water-based Composite Latex Cement

Waterproofing materials

P-215 Water-based Composite Latex Cement

P-215 is a highly elastic composite material which is mainly composed of imported macromolecular resins and vinyl resins. When mixed with high-alumina cement, aggregates, and other chemical components, a supple and highly elastic and adhesive waterproofing cement material is generated.

【Properties】

Solid ingredients account for 55% of the product and its performance is far superior to other products with solid component proportions of less than 40% available on the market.
Superior breathability, applicable to wet surfaces, non-toxic
Exceptional adhesion to cement base materials and RC; direct application of tiles without worries of detachment.

【Uses】

Interlayer waterproofing projects for external walls, window frames, new/old seams, roofs, bathrooms, reservoirs (non-toxic), external basement walls, atrium gardens, and planter boxes

【Method】

Remove all objects, dust, and loose material from the construction surface.
Partially apply 2-3 coats of the mixture to pipe edges, cracks, and new/old seams (resin/powder ratio of 2:1). Attach a polyester mesh prior to drying of the first coat.
Prior to full coating, apply a layer of Plimates waterproof primer. Allow a drying period of around 30 minutes. Then mix the resin, powder, and 5-10% water until a cement-like texture is generated. Apply 2-3 coats (the thickness of each layer should not exceed 1mm). Don’t apply the next layer until the previous layer is completely dry.

【Reminders】

Stirring time must be sufficient to ensure even distribution of the powder.
Addition of too much water to the resin-powder mixture (over 25%) tends to result in aggregate sedimentation which affects construction.
The dried membrane is characterized by high ductility. It is therefore not advised to cover external walls with a thin layer of concrete polish to avoid crack formation.