【Method】

• Use a grinder to expand the scope of application and remove the detached cement paint coating (scrape the paint off the cement surface thoroughly to ensure that the product has the desired effect).
• Remove dust from the surface with a clean brush.
• Apply three coats of 506 Efflorescence Prevention Agent with a brush (every coat requires a 30-minute drying time).
• Observe for three days prior to the puttying and painting process.

【Reminders】

• If the agent is dripped or spilled on the ground or other paint surfaces, it must be wiped off immediately.
• Crystal formation on surfaces of unremoved paint surrounding the application area after completion of the coating process is normal. Remove these crystals prior to paint application.
• A smooth and solid surface is generated after treatment with the efflorescence inhibitor. If puttying is difficult, a thin coat of white clay may be applied.

White clay preparation: cement enhancer 707A (or white glue) + seaweed powder mixed with water (add a small amount of water and stir until a pulp-like texture is formed)→1:1→add white cement and stir until the pulp-like white clay is created. Apply a thin coat and continue with puttying and painting upon drying.